Autoglym Polar Blaster Snow Foam Gun
LASHINGS OF CLEANING POWER
Thick, clingy foam for Polar Blast, an optimised density for an efficient deep clean with Polar Wash, and the perfect consistency to apply Polar Seal in seconds. Our Polar Blaster will turn your pressure washer into the ultimate car cleaning machine, rapidly ensuring total coverage with the ideal level of foam for a swirl-free, super glossy finish.
WIDE NECK BOTTLE
For ease of use we’ve thought of everything, down to the smallest detail. In this case, the wide neck reservoir bottle. Beautifully considered, so you can pour the correct amount of diluted product, without spilling a drop.
ADJUSTABLE SPRAY PATTERN
To ensure total coverage and appropriate dwell time, the Polar Blaster can be quickly adjusted to follow your car’s contours. Simply ‘start your engines’ (aka your pressure washer), turn the nozzle protector anti-clockwise and away you go.
EXCELLENT FOAMING CAPABILITIES
The Polar Blaster produces just the right thickness of foam, whether you’re pre-washing, washing or sealing. And all you need to do to make sure you have the best quality foam every time. Turn the mix dial on the top clockwise until it locks out.
Polar Blaster Assembly:
- Attach the clear Pickup Tube (C) to the brass nozzle on the underside of the Foam Gun Head (B).
- Attach the black end of the Connector (A) to the hand gun on your pressure washer.
- Pull back the spring-loaded brass collar on the Connector (A) and connect it to the silver nozzle on the Foam Gun Head (B).
Polar Blaster In Use:
- Dilute the product at the recommended rate, outlined on the sidewall of the Polar reservoir bottle (D).
- Screw the Foam Gun Head (B) onto the Polar reservoir bottle (D) and attach the Polar Blaster to your pressure washer lance.
- Aiming at the floor, pull the trigger on your pressure washer, allowing the Polar product to feed through.
- Turn the Dial (E) to adjust the foam level and turn the Nozzle (F) to change the spray pattern.
- Once the Polar product has fed through at the desired level, begin applying to your car in accordance with the relevant Polar Series product instructions.
- Rinse the reservoir bottle with clean water after using it with each product.
- Flush through the Polar Blaster with clean water when you have finished using it to apply all intended products.
The Connector (A) is compatible with the Karcher K-Series of pressure washers.