CARPRO UltraCut
UltraCut
CARPRO UltraCut is one of the most versatile cutting compounds you’ll ever use, suitable for all defect removal. You can alter its cutting ability by variations in your pad choice and hand movement.
UltraCut contains a cocktail of fully diminishing abrasives, which correct heavy defects, while producing minimal hazing. Combine it with the CARPRO cutting pads (wool, flash, cool) or microfibres for extremely effective and efficient defect removal. Drop down to CARPRO orange polishing pad and you can finish down hologram-free even on the most sensitive paints.
EXTREME CUTTING ACTION
EXTREMELY LOW DUST
SUITABLE ON ALL PAINT FINISHES
SUITABLE FOR DUAL ACTION AND ROTARY
UltraCut is a perfect solution for rotary or DA polishing with extremely low dusting and a lubricant that allows the abrasives to be fully worked over extended periods. This allows total breakdown with less marring and holograms.
FOR D/A
- Prime a clean dry pad with a very thin worked-in layer of compound and add an additional 3-4 pea sized drops of UltraCut.
- Spread product across a section.
- Raise speed to HIGH (4-5).
- Use MIN pressure for first 2-3 passes and increase with each pass.
- Blow air on pads often.
- When scratches disappear or the polish has become clear, wipe clean with a MF towel.
- Clean pad.
- Move to next section, apply 2-4 pea-sized drops to the pad and repeat steps 2-7.
FOR ROTARY
- Prime a clean dry pad with a very thin worked-in layer of compound and add an additional 3-4 pea sized drops of UltraCut.
- Spread product across a section.
- Keep polisher on LOW speed (1000-1200 RPM).
- Use MIN pressure for first 2-3 passes and increase with each pass up to MAX.
- Finish with LOW pressure.
- When scratches disappear or the polish has become clear, wipe clean with a MF towel.
- Clean pad.
- Move to next section, apply 2-4 pea-sized drops to the pad and repeat steps 2-7.