Our Antibacterial Fabric Cleaner works in harmony with our Repel Fabric Protectant by cleaning a surface, removing bacteria and creating a stronger bond for Repel’s coating on application, ensuring maximum protection and durability.
Reset Antibacterial Fabric Cleaner:
Formulated as an antibacterial Fabric Cleaner that works in harmony with our Repel Fabric Protectant, Reset is safe to use on Alcantara, Fabric, Leather, Convertible Roofs, Plastic & Hard Surfaces.
Reset kills 99.9% of microbes, mould and fungus on contact, whilst inhibiting re-growth and providing a stronger bond for our Repel Fabric Coating.
Application on fabrics:
- Spray generously onto the surface from 20-30cm away.
- Agitate the surface with our interior cleaning brush.
- Repeat the process on more heavily soiled areas and stubborn stains.
- Wipe off excess with one of our white interior microfibres until the surface is dry to the touch. Alternatively, extraction via wet-vac would yield the best results.
Application on a convertible roof:
- Spray generously onto the surface from 20-30cm away.
- Agitate the surface with our interior cleaning brush.
- Repeat the process on more heavily soiled areas and stubborn stains.
- Rinse off excess with a pressure washer or strong stream of water until water runs clear.
Application on hard surfaces:
- Spray reset into a microfibre cloth until cloth becomes damp.
- Wipe across the surface.
- Flip over cloth onto the dry side and lightly wipe to remove any excess.
Repel Fabric Protectant is an ultra hydrophobic textile coating which creates a protective barrier on almost every fabric, offering unrivalled levels of water-repellency.
Unlike many other fabric protectants, our coating bonds to individual fibres, allowing the textile to remain flexible and breathable, whilst protecting from stains, chemicals & water damage.
Being solvent-based, the coating dries faster, penetrates deeper and will not alter the colour or finish of the fabric.
Formulated for use on:
- Convertible Roofs/soft tops
- Carpets/floor mats
- Fabric seats
- Alcantara finishes
- Race-tex finishes
- Shoes (fabric, suede, canvas)
- Coats & Jackets
- Exterior fabrics – Marquees, tents, and awnings
Directions:
Test on an inconspicuous area before application.
- Designed to work with our Reset Antibacterial Fabric Cleaner, thoroughly clean the surface with Reset before application. This method creates a stronger bond for Repel and ensures maximum protection and durability.
- Allow the surface to dry fully after cleaning with Reset.
- Spray onto the surface evenly from a distance of 20-30cms.
- Wipe off excess from plastics, trim or leather.
- Touch dry in 1-2 hrs, fully cured in 24hrs.
Two coats are recommended for maximum durability.
Lasts a minimum of 1 year after a full application.
