Our Antibacterial Fabric Cleaner works in harmony with our Repel Fabric Protectant by cleaning a surface, removing bacteria and creating a stronger bond for Repel’s coating on application, ensuring maximum protection and durability.
Reset Antibacterial Fabric Cleaner
Formulated as an antibacterial Fabric Cleaner that works in harmony with our Repel Fabric Protectant, Reset is safe to use on Alcantara, Fabric, Leather, Convertible Roofs, Plastic & Hard Surfaces.
Reset kills 99.9% of microbes, mould and fungus on contact, whilst inhibiting re-growth and providing a stronger bond for our Repel Fabric Coating.
Application on fabrics:
- Spray generously onto the surface from 20-30cm away.
- Agitate the surface with our interior cleaning brush.
- Repeat the process on more heavily soiled areas and stubborn stains.
- Wipe off excess with one of our white interior microfibres until the surface is dry to the touch. Alternatively, extraction via wet-vac would yield the best results.
Application on a convertible roof:
- Spray generously onto the surface from 20-30cm away.
- Agitate the surface with our interior cleaning brush.
- Repeat the process on more heavily soiled areas and stubborn stains.
- Rinse off excess with a pressure washer or strong stream of water until water runs clear.
Application on hard surfaces:
- Spray reset into a microfibre cloth until cloth becomes damp.
- Wipe across the surface.
- Flip over cloth onto the dry side and lightly wipe to remove any excess.
Repel Fabric Protectant is an ultra hydrophobic textile coating which creates a protective barrier on almost every fabric, offering unrivalled levels of water-repellency.
Unlike many other fabric protectants, our coating bonds to individual fibres, allowing the textile to remain flexible and breathable, whilst protecting from stains, chemicals & water damage.
Being solvent-based, the coating dries faster, penetrates deeper and will not alter the colour or finish of the fabric.
Formulated for use on:
- Convertible Roofs/soft tops
- Carpets/floor mats
- Fabric seats
- Alcantara finishes
- Race-tex finishes
- Shoes (fabric, suede, canvas)
- Coats & Jackets
- Exterior fabrics – Marquees, tents, and awnings
Directions:
Test on an inconspicuous area before application.
- Designed to work with our Reset Antibacterial Fabric Cleaner, thoroughly clean the surface with Reset before application. This method creates a stronger bond for Repel and ensures maximum protection and durability.
- Allow the surface to dry fully after cleaning with Reset.
- Spray onto the surface evenly from a distance of 20-30cms.
- Wipe off excess from plastics, trim or leather.
- Touch dry in 1-2 hrs, fully cured in 24hrs.
Two coats are recommended for maximum durability.
Lasts a minimum of 1 year after a full application.